Home

Modular front 3HE = mm 128,6x6TE - Code 010D306

The modular front parts are made of a natural anodized aluminium panel with a 2,5 mm thickness. By two self extinguishing noryl VO plastic joints, screws and nuts included in the set, the front part firmly connected to the pressed circuit.
A front part is generally equipped with two aluminium handgrips meant for the card pulling out. Optionally, the pull-out handgrips can be supplied in black plastic material with a plate for marking, upon demand.
Control and/or displaying parts can be placed on the front part, after suitable processing and/or silk-screen printing.

Modular front 6HE = mm 261,8x6TE - Code 010D606

The modular front parts are made of a natural anodized aluminium panel with a 2,5 mm thickness. By two self extinguishing noryl VO plastic junctions, screws and nuts included in the set, the front part firmly connected to the pressed circuit.
A front part is generally equipped with two aluminium handgrips meant for the card pulling out. Optionally, the pull-out handgrips can be supplied in black plastic material with a plate for marking, upon demand.
Control and/or displaying parts can be placed on the front part, after suitable processing and/or silk-screen printing.

The kit shown in scheme is composed by:

1. Front 6HE 6TE code 040D606 1 piece
2. Screw 2,5MAx10GSEGO code 318T000 2 pieces
3. Knurled screw 2,5MA code 310T000 2-4 pieces
4. Stop screw in noryl VO code 122Z000 2-4 pieces
5. Junction noryl VO code 050Z000 2 pieces
6. Nut 2,5MA code 020T000 6 pieces
7. Screw 2,5MAx12 head CIL code 322T000 2 pieces
8. Bar 6TE code 150S006 2 pieces
9. Handgrip 6TE code 210S006 2 pieces

Processing example for personalized plan.

This closed satin fronts, made of a natural anodized aluminium with 2,5 mm thickness, are the front completion of rack, until 9HE. Rated whidths from 3TE to 85TE.